Very High-Risk Air Mattress

Very High-risk (FHD-Dual: Fartak Very High-risk Digital)

- - These air mattresses are used in special wards, including ICU and CCU, and especially for high-risk patients.
  - The D18 Pump is used for Very High-risk Air Mattresses. The maximum output flow of these pumps is 18L per minute. This flow is the result of a parallel operation of two 9L compressors. Under this system, if one of the compressors fails for any reason, the other compressor will continue to operate at a flow rate of 9L per minute; therefore, the air mattress will continue to operate.
  - Setting the air outlet pressure manually and automatically is one of the unique capabilities of the D18 pump.
  - Since adjusting the air outlet pressure in Air Mattresses is important and is directly related to the pump lifetime, this feature is one of the advantages of this pump over other pumps.
  - In these pumps, manual pressure adjustment is performed using the provided Height and Weight Table. In Auto Detection Mode, the device can detect the patient’s pressure on the mattress in 3 to 6 minutes and adjust the appropriate outlet pressure without user intervention.

Mattress Specifications
Air Mattresses Catalogs
Technical Specifications of the D18 Pump
D18 Pump User Manual
List of centers equipped with our Air Mattresses

Mattress Specifications

- - Mattress base cover: Tarpaulin
  - The washable waterproof stretch cover with a zip around
  - The airway is made of soft TPU. This type of airway is very resistant to changes in the position of the bed and mattress and does not break or tear.
  - It contains bilateral CPR and three exit routes for quick deflation.
  - 20 replaceable Thermoplastic Polyurethane (TPU) cells
  - The useful height of each cell after filling is 20 cm.
  - Each cell has a CQC Connector. Therefore, the nurse can easily change cells if damaged.
  - Each mattress contains a bag with 8 Caps inside. In case there is no spare cell in the center, they help to temporarily fix the leak so that the device continues to operate.
  - Each 20-cm cell contains two separate sections and each section has its own input and output. Therefore, in case the cell is perforated, the whole cell will not be empty and the height will change from 20 cm to 10 cm. As a result, the whole system will not fail.
  - Contains a unique iLAL (Independent Low Air Loss) system for air circulation in the mattress area to prevent patients from sweating.
  - Contains Cell Retainer
  - Contains Transport Cap to move the patient with the mattress without using the pump
  - Mattress dimensions: 200*90*20

Download the Catalogs of our Air Mattresses here:
Air Mattresses Catalogs

Technical Specifications of the D18 pump

- - Equipped with Digital Outflow Pressure Regulator
  - Digital Cycle Time Regulator
  - Contains an advanced Auto Detection Comfort feature for automatic adjustment of mattress outlet pressure according to the patient’s pressure on the mattress
  - Equipped with audio and visual alarms for Low Pressure
  - Equipped with audio and visual alarms for Power Failure

- - Equipped with audio and visual alarms for Service
  - Auto Firm System
  - Contains Static, Alternative & Pulsate modes
  - Capable to return from Static to Alternative mode automatically after 30 minutes, if the user forgets
    Has a lock key to protect the settings made
  - Has a high-efficiency PU Diaphragm Compressor
  - Double Compressor With 18L Capacity
  - Anti-shock Design of the Compressor inside the Pump
  - LCD to display the Cycle Time and Alarm Code
  - Internal Retaining Toggle
  - Water and Liquids Penetration Resistance Design